Page 18
As there might be some force needed to disconnect the bottom
plate, we recommend keeping the housing with one hand and using
the thumb of the other hand to push the front plate down.
Noteworthy, two slits on the sides of the bottom plate may be used
to smoothly lever off the plate using a screw driver.
Before mounting the stack back into the housing, inspect the
cabling before pushing the bottom plate upwards. Make sure not to
squeeze any wire!
‘Bottom part’, including the housing bottom plate and positioner
stack.
You must not disassemble the stack. If there is any problem with
the stack please contact attocube AG for support.
Содержание attoAFM I
Страница 20: ...Page 20 III 5 Changing the AFM Cantilever...
