Secure Data Path Applicationv 14
Exhibit 7-3
Command conventions. Do not type symbols when entering commands.
Symbol
Indicates
[ ]
Required entry
•
Space character (ASCII 32 decimal)
< >
Optional entry
|
pick one of
…
Ellipses, repetition of preceding item
\n
end of line
–
a range (6 – 9 = 6, 7, 8, 9)
Boldface words
must be typed as they appear
Italicized words
Parameters which must be replaced by whatever they represent
RACK 000 or 000
required parameters
LL
Hub zone [ 01 | 02 | 03 ]
C
Channel or port number
such as [ 2 | 3 | 4 | 5 | 6 | 7 | 8 ] in single-zone (Zone 1) configuration
Exhibit 7-4
A typical command/response sequence during a Telnet session.
Telnet session
screen
Explanation
setup•000:0120
Prepares to connect port 1 to port 2
.
in zone 1
OK
$
switch
OK
$
Valid input, accepted
Telnet prompt: ready for next command. Type the next command
immediately after the prompt ($ switch)
Implements changes to the hardware configuration, connecting port 1 to
port 2 in zone 1
Connection complete
Telnet prompt: ready for next command
