Atten GT-6150, Руководство пользователя

Страница: 17 / 28

System Set
Languages En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
System Set
Languages En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
System Set
Languages
En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
15
LCD Contrast System Set
〉 LCD Contrast
Keypad Tone System Set
〉
Keypad Tone
Message
PIN code Error
Set PIN code
0 - -
System unlock System Set
〉
System unlock
Set PIN code Locked
0 - -
PIN Code
：
000
System Lock-in System Set
〉
SystemLock-in
Password System Set
〉
Password
1. Used to lock the system so as to protect the system
settings parameters from being changed by any
unauthorized personnel.
2. Work with the fixed temperature under the
Parameter setup of the channels for the handle to
carry out lockup operation on the whole equipment for
welding processcontrol.
The factory default mode: OFF.
When the system is under the password setting state, enter
the three new Password, close the prompt window 3S after
the system displays the “Locked” prompt. Press the "Enter”
key to return to the Password setting item.
With correct password, the system will be unlocked and
the password will be cleared;
With wrong password, the system will send “wrong password"
prompt;
Used to turn on and off the key operation tone:
ON: There is a prompt tone when the button is pressed.
OFF: There is no prompt tone when the button is pressed.
The factory default is: ON.
Used to set the contrast ratio of the display:
10: The minimum contrast ratio.
100: The maximum contrast ratio.
The factory default is: 44.