Atten GT-6150, Руководство пользователя

Страница: 15 / 28

Parameter setup
13
Note:
4
Channel1 Set
GT-Y050
Temp Offset 0
Standby temp 150
Standby Delay OFF
Shutdown Delay
Shortcut Temp1
OFF
200
3
System set
Languages
En
Unit
C
Password
* * *
Keypad tone
ON
LCD Contrast
4 4
Hold "MENU" key until the load is completed (100%).
If the configuration page is under the protection of password,
the login to “Confirm” page shall be authorized. Press "▲" or
" " key to change the input value, press “Enter" key to
complete one input,press the Rapid temperature key"3",
Press the “Logout” key to return to the main interface.
If there is no password protection, or after the correct
password is entered, it will jump to the System Parameter
setup interface.At this time,the system parameters can be
configured.
Enter the channel settings page, where the correct handle
corresponding to the channel shall be connect.
In the System setup screen,use the '1' key and the '3' key to
select the channel to enter.
Note: '1' key corresponds to channel 1, Button '3' corresponds
to channel 2.
(GT-6150 products can only select channel 1.)
Do not change or insert the handle of the welding tool while setting the channel parameters to avoid damaging the welding
accessories and the Host.
1
50% 50%
Loading...
2
Login
* *
EXIT
9