8.5 Cooling down
The nozzle and accessory become very hot during use. Let them cool down before attempting
to move or store the tool.
To reduce the cooling time, set the on/off switch to position
Ⅰ
and let it run for a few minutes.
Switch the tool off and let it cool down for at least 30 minutes.
9.MAINTENANCE AND CLEANING
Attention! Before performing any work on the equipment, pull the power plug.
9.1 Maintenance
Your Power Tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
9.2 Lubrication
9.3 Cleaning
Your power tool requires no additional lubrication.
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
9.4 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
Voltage
220-240 V~, 50 Hz
Power supply
2000 W
Air temperature
/ Flow
