If you are not sure about the correct setting, start with a low temperature setting
and gradually increase the temperature until you achieve optimum results.
7.1 Mounting the correct accessory (if applicable)
Icon
Description
Purpose
Glass protection nozzle
Protection windows when
stripping frames
Soldering pipes
Cone nozzle
Welding, shrink sleeving (heat
concentrated over small area )
Fish tail surface nozzle
Drying, thawing (heat spread over
wider area )
Scraper
Stripping paint and varnish
Make sure that the tool is switched off and the nozzle has cooled down.
Touching a hot nozzle can lead to serious burns .Before attaching or replacing a
nozzle, allow the unit to cool down completely or use a suitable tool.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit.
Use only original nozzles according to the table that are suitable for your unit.
II
Bending plastic pipes and sheets.
Soldering plumbing joints, tin, special silver solder, SMD elements, cable
lugs.
Loosening rusted or tightly fastened nuts and bolts.
Removing old and even thick coatings of oil paint , lacquer, varnish and
synthetic plaster.
