33
Filter inspection and change
Figure 45 – Filter Inspection and change
1) Inspect daily for intact filter and excess dirt and
damage.
2) The air filter must be replaced after app. 10
hours of operation or when worn out.
3) The air filter can be inspected by lifting of the
filter cover after releasing the 4 filter cover bolts
(2 pcs on each side).
4) The air filter must be replaced if contamination is
hindering free air flow to the turbine and/or if
worn out in any other way.
Do not operate the
turbine without proper air filters installed.
5) Insert carefully the air filter into the filter holder
and install the filter cover in order to make the
Hammer Jet serviceable.
