ATS TTV1EEM-3T, Инструкция по установке, эксплуатации и обслуживанию

Страница: 13 / 31

Aqua Treatment Service ©2013 • www.aquat.com 11
Step 2I -
Volumetric capacity in gallons to regeneration.
Press NEXT to go to Step 3I. Press REGEN to exit
Installer Display.
Step 3I -
Adjust day override from 1 - 28 or OFF.
Press NEXT to go to Step 4I. Press REGEN to return to
previous step.
Step 4I -
Use
V
or
W
buttons to set the regen hour.
Press NEXT to go to Step 5I. Press REGEN to return to
the previous step.
Installer Display Settings
Step 1I -
To enter Installer Display press the NEXT and
V
buttons simultaneously for 5 seconds and release.
28 Day or 28/Volume (Gallons) selected in Con guration Settings Step 3CS
Step 1I -
To enter Installer Display press the NEXT and
V
buttons simultaneously for ve seconds and release.
Step 2I -
Adjust days from 1 - 28. Press NEXT to go to
Step 3I. Press REGEN to exit Installer Display.
Step 3I -
Use
V
or
W
buttons to set time of the regen
hour. Press NEXT to go to Step 4I. Press REGEN to return
to previous step.
Step 4I -
Use
V
and
W
buttons to set the regen minutes.
Press NEXT to exit Installer Display. Press REGEN to
return to previous step.
One of three sets of displays will be shown depending on what was selected in Con guration Settings Step 3CS.
Volume (Gallons) selected in Con guration Settings Step 3CS
Step 5I -
Use
V
or
W
buttons to set the regen minutes.
Press NEXT to exit Installer Display. Press REGEN to
return to previous step.
Step 2I
Step 3I
Step 1I
Step 4I
Step 5I
EXIT TO
DISPLAY
SCREENS
Step 2I
Step 3I
Step 1I
Step 4I
EXIT TO
DISPLAY
SCREENS
Control Valve cont: