ATS TTV1EEM-3T, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 31

Aqua Treatment Service ©2013 • www.aquat.com 10
Setting Regeneration Cycle Times
Step 1CT -
Press NEXT and simultaneously for 5 seconds and release.
If screen in Step 2CT does not appear, the lock on the valve is activated. To
unlock press
, NEXT, REGEN, in sequence, then press NEXT and
simultaneously for 5 seconds and release.
Step 3CT -
Adjust the length of the backwash from 1-20 minutes using
the or buttons.
Press NEXT to go to Step 4CT. Press REGEN to return to previous step.
Step 4CT -
Adjust the length of the regenerant draw from 1-99 minutes
using the or buttons.
Press NEXT to go to Step 5CT. Press REGEN to return to previous step.
Step 5CT -
Adjust the length of the second backwash from 1-20 minutes
using the or buttons.
Press NEXT to go to Step 6CT. Press REGEN to return to previous step.
Step 6CT -
Adjust the length of rinse from 1-20 minutes using the or
buttons.
Press NEXT to go to Step 7CT. Press REGEN to return to previous step.
Step 7CT -
$-+,,"%'!,"( 2%% *(&&#'-,+(*
.%.+*+"#)) *(&," ,(*1/#,"*2%%3(/(',*(%( !)&
%)&%%(,"*(',*(%.%.+*+"#)) *(&," ,(*1/#,"*2%%3(/
control of 0.5 gpm (1.9 lpm).
Press NEXT to exit Regeneration Cycle Times. Press REGEN to return to
previous step.
Step 2CT -
Select between SOFTENING or FILTERING.
"'+,,(*#+'(,+,,(( ' #++,,(20
second Backwash is automatically added to the regen cycle program after
Rinse 6CT. The status display for this extra backwash will appear as just
another cycle step in sequence.
*++,(!(,(,)*++,(0#,!'*,#('
Cycle Times.
Step 3
CT
Step 4
CT
Step 5
CT
EXIT TO
DISPLAY
SCREENS
Step 7
CT
Step 6
CT
Step 1CT
Flow
Rate AM
Time
Set
Volume
X1000
Regen
Backwash
Brine
Rinse
Fill
PM Days To
Regen
Step 2CT
Control Valve cont: