WARNING: Using solvents or products not specified by the equipment manufacturer may create
potential for formation of flammable or volatile gas mixtures. Always refer to product SDS or
contact the manufactuerer.
WARNING: Do not place objects that may obstruct the sample rack or blower.
WARNING: Before removing the air coil assembly always make sure the unit is powered off and
unplugged.
WARNING: Unit should always be operated in a well ventilated area. Refer to and adhere to SDS
sheets of product being tested.
WARNING: Proper Personal Protective Equipment (PPE) required for removal of hot glassware.
B.3 Cautions
The following statements are caution statements. These statements alert the operator to conditions that may damage
equipment. Operators must be aware of these conditions in order to ensure safe operation of the equipment.
CAUTION: Installation of electrical devices must be accomplished by competent personnel and
done in accordance with any current local and national codes.
CAUTION: The RTFO must be grounded and wired in accordance with national and local
electrical code requirements.
CAUTION: Before energizing the electrical power to the RTFO, place all controls in an OFF
position.
CAUTION: Do not exceed the maximum operating temperature.
CAUTION: All supporting and contacting surfaces must be non-flammable. Do not allow
flammable materials to contact the shell.
CAUTION: If an emergency shutdown needs to be performed, place ON/OFF switch in an OFF
position.
CAUTION: Do not overflow RTFO bottles. Refer to test specifications for proper amount of
material.
MAN - RTFO - REV: Org | B. Safety
4
