arming feature is
activated
and you will hear the siren to confirm the operation with one chirp, i.e. you can now
arm or disarm it with no chirps.
To activate the chirps again it can be done by turning the ignition “ON” and pressing the button #2 momentarily;
you will hear the siren to confirm an entry into the programming mode with 3 chirps. Within 7 seconds, by
pressing button #1 momentarily the silent arming feature is now
deactivated
and you will hear the siren to confirm
the operation with 2 chirps, i.e. you can now arm or disarm it with chirps.
7. Panic Mode
In emergency situations press and hold transmitter’s button #2 for 4 seconds, this will activate the panic mode.
The vehicle will honk and its hazard lights and parking lights will flash.
The panic mode can be deactivated by either pressing button #2 momentarily or turning the ignition to the “ON”
position, and then pressing the Valet/Override Switch momentarily (i.e. a system RESET).
8. Programming the Remote Control Transmitter
This is a code-learning system. The system controller will learn the remote control and program key-chain
transmitter(s).
Procedures of Entering Code-learning
(1)
Turn the ignition to “ON” position;
(2)
Momentarily press the Valet/Override Switch ON three times; and,
(3)
The siren will emit a short chirp three times and the parking lights will flash three times to confirm an entry into
the code-learning mode.
Note:
If at any time 7 seconds elapses without receiving input entry, the system will automatically EXIT the
code-learning mode. After button #1 of the remote transmitter is pressed users have 60 seconds to “train”
the transmitters before the system automatically exits the code-learning mode.
Programming Transmitters
In this mode, additional transmitters can be added to the system.
Note:
A maximum of 4 Remote Key-Chain transmitters can be programmed.
(1)
Press twice transmitter’s button #1 momentarily of each remote control transmitter that you wish to include.
(2)
The siren will chirp and the parking lights will flash each time a remote transmitter has learned successfully
with a confirmation corresponding to the number of the remote transmitter programmed.
Examples:
•
1st Remote Programmed= 1 siren chirp and 1 parking-lights flash
•
2nd Remote Programmed= 2 siren chirps and 2 parking-lights flashes
•
3rd Remote Programmed= 3 siren chirps and 3 parking-lights flashes
