6 / 26
3.4
Relay 1 / 2 Connection
dataM contains two relay outputs (
Relay 1
&
Relay 2
) which can be connected to the
ATS-LV 1000
controller terminal
strip by inserting the wires in Relay 1 and Relay 2 connection.
•
This connection can be used for
RELAY
function. Connect top (red marked connection) with positive terminal and
bottom (blue marked connection) with negative terminal. (same for Relay 2 yellow and green)
Note:
Connection wire size range: 20-26 AWG (0.13-0.52 mm
2
) , Wire stripe length: 7-8mm
3.5
RS485 A & B Connection
Two RS485 communication cables can be connected to
ATS-LV 1000
controller terminal strip by inserting the wires in
RS485-A , RS485-B connections.
•
Connect top purple marked connection with
RS485-A
terminal and bottom green marked connection with
RS485-B
terminal.
Note:
Connection wire size range: 20-26 AWG (0.13-0.52 mm
2
) , Wire stripe length: 7-8mm
RIGHT CONNECTOR
RIGHT CONNECTOR
