Atrump AL52, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 110

Machine Specification 2-1
2.1
Introduction
2.1.1 AL52/AM52 is one product of the vertical machining center series. This
machine is made up of bed base, headstock, main column, saddle, working
table, operation panel, hydraulic and pneumatic systems, lubrication system,
chip conveyor, chip collecting equipment, safety guards, CNC controllers, etc.
AL52/AM52 is designed to machine those workpieces that do not generate
powder chip, corrosion or flammable substances, such as magnesium alloy.
Please contact our local dealer or us if in doubt.
2.1.2 Because AL52/AM52 can machine the workpiece in an automatic mode, the
safety and efficiency of the working process could be increased
tremendously. Nevertheless, read all the manuals we provided thoroughly.
Do not try to use this machine unless you understand how to operate and
stop the machine and all the safety matters concerned. Details about how to
operate this machine are followed.
2.2
Noise Level
The noise level of this machine is within 85dBA under the condition of CNS 4600
standard. In real life, the noise level can be higher than 85dBA because actual
working conditions (workpiece material, tool performance, cutting coolant) might be
different from those of CNS4600 standard. Do not stay in the working area with
unpleasant noise level without wearing appropriate protect equipment, such as the
earplug. Otherwise might cause hearing hurt or more serious.