Atrump AL52, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 110

Machine Safety Regulation
1-5
1.1.3 Caution:
1.1.3.1 Turn off no fuse breaker of main power circuit when power supply is
insufficient or not stable.
1.1.3.2 Only the recommended or same grade hydraulic oil, lubricant oil and
grease are allowed to use on this machine.
1.1.3.3 Only the same specification and same grade fuses are allowed to use on
this machine.
1.1.3.4 To prevent from any damage of NC unit, operation panel, electrical
control panel...etc., the machine location should avoid electric shock.
1.1.3.5 Please do not change original parameter. If it is necessary, please keep
recording the value of original parameter and set the same value after
being changed.
1.1.3.6 Do not take away, cover or dirt the "WARNING", "DANGER" and
"NOTICE" plates. If they are blur or losing, please contact with us or your
local dealer for new plates.
1.1.3.7 Disposing wasted material and wasted lubricating oil shall obey the local
regulation and be deeply careful.
1.1.3.8 Only competent, well-trained personnel should be permitted to operate or
perform maintenance on this machine.
1.1.3.9 Before operating this machine, be sure that the responsible parties read
and understand this operation manual as well as the warning plates on
the machine.
1.1.3.10 Please use suitable personal protective equipment e.g. gloves, eye
protection…etc. during operation and setting.
1.1.3.11 Keep the machine clean and free from accumulation of hydraulic fluid, oil,
grease, water and trimmed flash. It is difficult, if not impossible, to
perform maintenance when the machine is covered with dirt and oil.
1.1.3.12 When person stand on the machine accessible areas, take care the risks
of slip/falling.
1.1.3.13 It is essential that operator is adequately trained in the safe use,
adjustment and operation of the machine. The training of the user
operator should be carried out by our authorized agent or service
engineer in an oral/practical in site of the ordered press, including
protective device explanation, press mechanism, operation/use.