Figure 3-2 WireSpan 610 panel
Table 3-1 lists the functions of the controls and indicators located on
the top panel of the WireSpan 600 / 610. The index number in
Table 3-1
correspond to the item numbers in
Figure 3-1
and
Figure 3-2.
Table 3-1
N Control
or
Indicator
Function
1
PWR indicator
Lights when WireSpan 600 / 610 is powered
2
SYN indicator
Lights when the E1 link port synchronization
3
BPV indicator
Lights when one or more bipolar violations
detected on E1 link receiver.
4
AIS indicator
Lights when two consecutive double frames
each contain two or fewer zeros out of 512 bits,
and when framing alignment is lost.
5
Left, Right, Enter, Exit
buttons
When depressed, activates the LCD screen to
move to next by your choose.
6
BNC / RJ48C indicator
Lights to indicate E1 link port selected
7
INT / E1 / DTE(DCE)
Lights to indicate clock sources selected
8
DL / LL
Lights to indicate loopback selected, if clean to
operate in normal case
9
Impedance button
When depressed, changes setting between BNC
and RJ48C.
10
Clock Source button
When depressed, changes the Clock reference
source. Keep to depress will to change into next
mode.
3-2
