background image

 

 

21

  / 

22

 

 

respect to the compressor shall apply for an additional twelve months, excluding all labor charges. The 

obligation of the manufactory under this warranty is limited to the repair or replacement of parts, 

components, or assemblies that in the opinion of the manufactory are defective. This warranty is further 

limited to the cost of parts, components or assemblies and standard straight time labor charges at the 

servicing location. Time and hourly rate schedules, as published from time to time by the manufactory, 

apply to all service procedures. Additional expenses including without limitation, travel time, overtime 

premium, material cost, accessing or removal of the ice machine, or shipping are the responsibility of 

the owner, along with all maintenance, adjustments, cleaning, and ice purchases. Labor covered under 

this warranty must be performed by a manufactory Contracted Service Representative or a refrigeration 

service agency as qualified and authorized by the COMPANY’s local Distributor. The manufactory’s 

liability under this warranty shall in no event be greater than the actual purchase price paid by customer 

for the ice machine. The foregoing warranty shall not apply to (1) any part or assembly that has been 

altered, modified, or changed; (2) any part or assembly that has been subjected to misuse, abuse, 

neglect, or accidents; (3) any ice machine that has been installed and/or maintained inconsistent with 

the technical instructions provided by the manufactory; or (4) any ice machine initially installed more 

than five years from the serial number production date. This warranty shall not apply if the Ice Machine’s 

refrigeration system is modified with a condenser, heat reclaim device, or parts and assemblies other 

than those manufactured by the manufactory, unless the manufactory approves these modifications for 

specific locations in writing. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR 

GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event shall the 

COMPANY be liable for any special, indirect, incidental or consequential damages. Upon the expiration 

of the warranty period, the COMPANY’s liability under this warranty shall terminate. The foregoing 

warranty shall constitute the sole liability of the COMPANY and the exclusive remedy of the customer or 

user. To secure prompt and continuing warranty service, the warranty registration card must be 

completed and sent to the COMPANY within five (5) days from the installation date. Complete the 

following and retain for your record: Distributor/Dealer 

_____________________________________________________________________________   

Model Number ________________________________   

Serial Number __________________________________   

Installation Date 

______________________________________________________________________________

 

 

 
 
 
 
 
 

Содержание YR140-AP-161























Отзывы: