56
Notes on the operating instructions
Gigaset SL560 / Aton CL303 / SWZ PTT EN / A31008-M1710-F151-1-7619 / appendix.fm / 10.7.06
PC Interface
You can connect the handset to your com-
puter using an optional data cable
(page 58). Your handset can communi-
cate with a computer via a program
(free download from
http://gigaset.siemens.com/shc/
0,1935,hg_en_0_108385_rArNrNrNrN_v
5_pageType%253Adownloads_imagePos
(Aton CL303 handset).
You can access your handset's directory
and load sounds (.mid) and screensaver
pictures (.bmp) onto the handset from
your computer.
During the transfer of data between hand-
set and PC, you will see
Data Transfer
on the
display. During this time, it is not possible
to use the keypad and incoming calls will
be ignored.
Writing and editing a text
message
The following rules apply when writing a
text message:
u
Control the cursor with
u v t
s
.
u
Characters are added to the left of the
cursor.
u
Press the star key
*
to show the
table of special characters.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
You can call up the table of special charac-
ters when writing an SMS using the
*
key. Select the required character and
insert it with
§Insert§
.
Writing an SMS/name
(without predictive text)
When you press a key and
hold
it, the
characters of that key appear in
the display
and are highlighted one after the other.
When you release the key the highlighted
character is inserted into the input field.
Press the hash key
#
and
hold
it to
switch from "Abc" mode to "123" and from
"123" to "abc" and from "abc" to "Abc"
(upper case: 1st letter upper case, all oth-
ers lower case). Press the hash key
#
before
entering the letter.
You can see in the display whether upper
case, lower case or digits are selected.
¤
Save changes.
¤
Press the
§Save§
display key.
¤
Then press and
hold
the
a
key.
The handset changes to idle status.
Note:
If the handset is in Bluetooth mode (see
page 46), this mode is interrupted if the data
cable is connected. An existing Bluetooth con-
nection is only interrupted once a current
transmission has been completed.
