ATN PS-27 Скачать руководство пользователя страница 10

Страница: 10 / 56

1-4

ATN’s liability hereunder for damages, regardless of the form or action,

shall not exceed the fees or other charges paid to ATN by the customer

or customer’s dealer. ATN shall not, in any event, be liable for special,

indirect, incidental, or consequential damages, including, but not lim-

ited to, lost income, lost revenue, or lost profit, whether such damages

were foreseeable or not at the time of purchase, and whether or not

such damages arise out of a breach of warranty, a breach of agreement,

negligence, strict liability or any other theory of liability.

PRODUCT WARRANTY REGISTRATION

In order to validate the warranty on your product, ATN must receive a

completed Product Warranty Registration Card for each unit or com-

plete warranty registration on our website at www.atncorp.com. Please

complete the included form and immediately mail it to our Service Cen-

ter: ATN Corporation, 1341 San Mateo Avenue, South San Francisco,

CA 94080.

OBTAINING WARRANTY SERVICE

To obtain warranty service on your unit, End-user must notify ATN ser-

vice department by calling 800-910-2862 or 650-989-5100 or via e-mail

[email protected] to receive a Return Merchandise Authorization

number (RMA).
When returning please take or send the product, postage paid, with a

copy of your sales receipt to our service center, ATN Corporation at the

address noted above. All merchandise must be fully insured with the

correct postage; ATN will not be responsible for improper postage or,

missing or damaged merchandise during shipment.
When sending product back, please clearly mark the RMA# on the

outside of the shipping box. Please include a letter that indicates your

RMA#, Name, Return Address, reason for service return, Contact in-

formation such as valid telephone numbers and/or e-mail address and

proof of purchases that will help us to establish the valid start date of

the warranty. Product merchandise returns that do not have an RMA

listed may be refused or a significant delay in processing may occur.
Estimated Warranty service time is 10-20 business days. End-user/cus-

tomer is responsible for postage to ATN for warranty service. ATN will

cover return postage/shipping to continental USA end-users/custom-

ers after warranty repair only if product is covered by aforementioned

warranty. ATN will return product after warranty service by domestic

ground service and/or domestic mail. Any other requested, required

or international shipping method the postage/shipping fee will be the

responsibility of the end-user/customer.

Содержание PS-27

























































Результаты поиска

Содержание PS-27

Отзывы:

Похожие инструкции для PS-27

Бренды по названию

Популярные бренды

ATN PS-27, Руководство оператора

Результаты поиска

Содержание PS-27

Отзывы:

Похожие инструкции для PS-27

Бренды по названию

Популярные бренды