H O M E S / C O M M E R I C A L - Q U I C K S T A R T G U I D E
Remove the container from the machine and fill with Atmosclean Sanitizing Solution™.
Replace the container and secure the fluid hose using the quick connect.
Ensure the fog output is set to at least 50%, press the enter button, and vacate the space.
Allow the machine to run continuously for 20 minutes, or until visibility is limited to 4ft.
Place the machine in a room that has an air return vent. Make sure all windows and doors
are closed and the air conditioner is operating or the furnace fan is set to “on”.
Connect the machine to the properly rated power supply outside the home, use an
extension cord if neccesary. Turn the switch on back of machine “On”. Allow up to 10
minutes for machine to preheat, the percentage is viewable on the OLED display.
When finished, disconnect the power cord from the outlet. Allow the vapor to naturally
settle and naturally dissipate for up to 1 hour before re-entering space. Avoid direct
inhilation of any remaining vapor.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WARNING!
Atmosclean vapor will trigger most smoke detectors. For more info on safety precautions, please see page 3.
If your OLED Display reads “UH OH, EMPTY FLUID TANK!”, please follow the steps on page 4. Before proceeding with the
following steps, ensure no person or pet is in the home. For your safety, we recommend wearing personal protective
equipment.
6
Congratulations! Your space is officially Atmosclean!™
