Atmos S 351, Руководство по обслуживанию

Страница: 3 / 40

3
The ATMOS S 351 is a surgical suction unit which is used
in medical ranges to remove bodily fl uids (secretions)
and rinsing fl uids by means of a vacuum generated in
the suction system. The variants of the ATMOS S 351
are used in obstetrics, during eye operations and for
intermittent drainage.
1.1 Valid operating instructions
The ATMOS S 351 is manufactured in 3 variants:
• ATMOS S 351
• ATMOS S 351 Natal
The ATMOS S 351 Natal provides for a comfortable
realisation of vacuum extractions.
1.2 Information on manufacturer
Further information, accessories and spare parts are
available from:
The operating instructions relating to the ATMOS S 351
form part of these service instructions. The persons
authorized for service work must be familiar with the
contents, the kind of installation, the start-up as well as
the operation described therein.
ATMOS
MedizinTechnik GmbH & Co. KG
Ludwig-Kegel-Straße 16
79853 Lenzkirch
Deutschland
Tel. + 49 (0) 76 53 / 6 89-0
Fax: + 49 (0) 76 53 / 6 89-190
+ 49 (0) 76 53 / 6 89-493 (Service Center)
atmos@atmosmed.de
www.atmosmed.de
ATMOS Current issue
S 351, S 351 Natal
Software control 2.0 (or higher)
Software, CAN –
Hardware control 1.1
Operating instructions:
ATMOS S 351 444.0405.A
ATMOS S 351 Natal 444.0401.A

Information which is of particular interest to the
user is printed in a box throughout this manual.
1.4 For your safety
Please also pay attention to chapter 2.0 "For your safety"
in the operating instructions.
Maintenance and/ or opening and repair of the ATMOS
S 351 may be carried out only by an expert authorised by
the manufacturer. When doing this, technical and hygienic
protective measures are to be taken.
When assembling the housing, particular care is to be
given to the electric cabling and the silicone hose. These
must not be bent sharply or get caught. If necessary, the
lines should be retracted somewhat into the rear housing
shell.
In case of improper maintenance or repair of the appliance
and the use of non-original parts the product liability of
the manufacturer will become forfeited. When opening the
appliance during the period of guarantee the guarantee
given by the manufacturer will be forfeited.
When the appliance is decommissioned at the end of its
service life and is to be disposed of, the components are to
be given separately into the various recycling processes.
The same regulations are to be observed concerning the
disposal of replacement parts.
 Before opening the ATMOS S 351 for service
work, switch off the unit and remove the power cab-
1.3 Exclusion of liability
ATMOS assumes responsibility for the unit, as far as safe-
ty, dependability and functionality are concerned, only if
– assembly, readjustment, modifi cations, extensions or
repairs are carried out by ATMOS or by persons autho-
rized by ATMOS,
– only original ATMOS parts are used and,
– the unit is used in compliance with the operating
instructions.
1.0 General description