manualshive.com logo in svg

Atmos MEDAP FINA DFLOW, Руководство по эксплуатации

Поделиться
Скачать
Atmos MEDAP FINA DFLOW Скачать руководство пользователя страница 18

Initial operation

Mounting accessories

18

GA 5752 2804 GB 18

3

WARNING!

Tensile forces!
Hold the basic unit with one hand when installing or removing accessories in order 

to compensate for the tensile forces which are created.

3.3.2 

Connection of the bubble humidifier (REF 5752 5315)

11

22

Fig. 4:  Connection of the bubble humidifier

Connecting the bubble humidifier

 

Ensure that the tube connector of the 

bubble humidifier has two seals.

 

Fill the humidifier bottle up to the marking 

‘Filling level’ with distilled water and screw 

the bubble humidifier cap into place.

 

Screw the bubble humidifier cap (1) directly 

onto the flowmeter outlet (2) and tighten 

finger-tight until it stops.

 

Pay attention that no tensile forces affect 

the bubble humidifier.

3.3.3 

Connection of disposable humidifiers from other manufacturers

Disposable humidifiers complying with the interface description may be connected to the 

flowmeter outlet.

 

Screw the disposable humidifier directly onto the flowmeter outlet and tighten finger-tight until 

it stops.

Содержание MEDAP FINA DFLOW

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды