Atmos MEDAP FINA DFLOW, Руководство по эксплуатации

Страница: 17 / 32

Initial operation
Mounting accessories
GA 5752 2804 GB 18
17
3
3.2.2 Version A
11
22
Fig. 2: Version A
Tapping unit with integrated gas pin

The tapping unit (1) is plugged directly into
the terminal unit (2).
3.2.3 Version B
22
11
44
66
55
77
33
Fig. 3: Version B
Tapping units with rail clamp and NIST
connection

With the upper edge of the guide groove at
the front, position the rail clamp (1) at a
slight angle on the equipment rail (2) and
then press it against the equipment rail and
allow it to click into place.

Make sure that the rail clamp is correctly
secured and that the tapping unit is in a
stable position on the equipment rail.

Insert the NIST nipple (3) of the connection
tube into the NIST connection (4) of the
tapping unit and tighten down the NIST
screw connection (5) by hand.

Plug the gas probe (6) into the terminal unit
(7).
3.3 Mounting accessories
3.3.1 General
WARNING!
Tensile forces!
The connected accessories must not exert any mechanical forces which could
adversely affect the secure fit of the product.