EN
www.atmos.cz
24-EN
Operation and Maintenance Manual - EN
MAIN menu
ON (START)
– This is the command to switch on the burner. Confirm the switch-on command by
pressing the
Enter
key.
OFF (STOP)
– This is the command to switch off the burner. Confirm the switch-off command by pressing
the
Enter
key.
PARAMETERS
– This is a
separate menu
where individual parameters and functions can be set
depending on the type of the boiler and heating system and the authorization
level.
INFORMATION
– This is a
separate menu
where you can view the current status of individual
devices and elements on the A25 burner.
PASSWORD
– This is a very important parameter,
designed only for service engineers.
After entering
the required password the service engineer is allowed to change some parameters
depending on the authorization level.
MODULE
– shows actual connected additional module, e.g. AC07X-C.
PROFIL
– shows actual set burner profile -
A25, A25 pneu, A25 GSP, A25 GSP pneu, A25PX, A25PX
pneu, A45, A45 pneu, A85, A85 pneu, A85 pneu C
Basic authorization levels:
User, service engineer (installer), manufacturer
Accessible parameters depending on authorization:
Customer:
T1, T4, T6, S16, S17, S18, S19, Restart, Language
Service engineer:
T1,T2, T4, T5, T6, T7, T8, T10, S1, S2, S3, S6, S11, S12, S13, S14, S15, S16,
S17, S18, S19, S24, S26, S27, S28, S29, S30, S31, S32, S33, S34, S35, S36,
S37, S38, S39, S40, S41, S42, S43, S44, S45, S48, S49, S50, S51, S52, S53,
S54, S55, S56, S57, S58, S59, S60, S61, S62, S63, S64, S65, S66, S67, S68,
OffsetTS, OffsetTV, OffsetTK, OffsetTSV, Reset, Restart, Language
Manufacturer:
all
CAUTION - The customer is expressly prohibited to change parameters or functions
of the burner without consent of the manufacturer or service engineer although some
of them are not directly protected with a password.
Otherwise the manufacturer reserves
the right to decline the guarantee due to an inexpert intervention into the burner.
Particular passwords are production secret of the ATMOS Company and the
service engineer (installer) is not authorized to provide them to anybody without the
manufacturer’s consent.
INFO
- After replacement of any ignition spiral the
service engineer must enter the
password: 1234, which will reset the check algorithms
for the ignition spirals. Without
entering of this password the ignition spirals will never be started (activated).
Содержание A85
Страница 1: ...Operation and Maintenance Manual EN www atmos cz Operation and Maintenance Manual ...
Страница 2: ...www atmos cz Operation and Maintenance Manual EN ...
Страница 61: ...Operation and Maintenance Manual EN EN www atmos cz EN 61 20 Expanded view of the burner ...
Страница 66: ...EN www atmos cz 66 EN Operation and Maintenance Manual EN Notes ...
