8
3.11. PICTOGRAMS, SAFETY SIGNS AND LABELS ON THE DEVICE
Warning
Do not remove any safety signs, stickers or
labels from the device. Keep all safety signs,
stickers and labels in legible condition.
The following safety signs and labels are
attached to the device:
Warning of optical radiation
(here: UV light)
This symbol indicates dangers to the life and
health of persons due to UV optical radiation.
This danger exists if user maintenance is car-
ried out in disregard of the user manual.
Warning of electrical voltage
This symbol indicates dangers to the life and
health of persons due to electrical voltage.
This danger exists if user maintenance is
carried out in disregard of the user manual.
Wear safety glasses (here: UV light)
This symbol indicates that UV eye protection
it is mandatory on professional electric
maintenance with open device housing.
[ Not applicable to user maintenance tasks
observing the user manual. ]
No stepping on device
This symbol indicates that it is forbidden to
step or sit on the device.
Follow the manual
This symbol indicates that the user manual
must be observed.
Warning
(on Dust collector flaps)
Power must be disconnected before opening
the side Dust collector flaps
No User Serviceable Parts Inside!
(for production
batch 2020-12): (across Dust collector flap edges)
WARNING
– Skin or eye damage may result from
directly viewing the light produced by the internal
UV LEDs in this apparatus. Always disconnect
power before servicing.
SUITABLE FOR COMMERCIAL USE ONLY.
(production batch 2020-12 only)
WARNING
– TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE TO WATER OR RAIN.
For symbols on the type label please refer to
“Pictograms and abbreviations”.
3.12. RESIDUAL RISKS
Warning of electrical voltage and UV radiation
Work on the electrical components must only
be carried out by a manufacturer authorized
specialist company!
Warning
Consumables, damaged parts and device com-
ponents may only be replaced by manufactu-
rer’s original consumables and spare parts.
Warning of electrical voltage and UV radiation
Before any work on the device, remove the
mains plug from the mains socket! Hold onto
the mains plug while pulling the power cable
out of the mains socket.
+
Warning
Danger can occur at the device when it is used by
untrained people in an unprofessional or impro-
per way! Observe the personnel qualifications!
Note
Do not operate the device without Dust collec-
tors correctly inserted into the air inlet! Dange-
rous UV radiation may emit the casing.
Note
Do not use abrasive cleaners or solvents to
clean the device
ATMOFIZER PRO – USER MANUAL – 3. SAFETY
