manualshive.com logo in svg

Atmel ATmega8535, Руководство пользователя

Устройство Atmel ATmega8535 - высокоэффективный микроконтроллер, обеспечивающий широкий функционал и надежную работу. Чтобы изучить все возможности устройства, скачайте бесплатное руководство пользователя с сайта manualshive.com. Получите доступ к полной информации для использования микроконтроллера на максимуме его возможностей.

Поделиться
Скачать
background image

157

ATmega8535(L)

2502K–AVR–10/06

Note:

1. See “About Code Examples” on page 7.

The receive function example reads all the I/O Registers into the Register File before
any computation is done. This gives an optimal receive buffer utilization since the buffer
location read will be free to accept new data as early as possible.

Receive Compete Flag and 
Interrupt

The USART Receiver has one flag that indicates the receiver state.

The Receive Complete (RXC) Flag indicates if there are unread data present in the
receive buffer. This flag is one when unread data exist in the receive buffer and zero
when the receive buffer is empty (i.e., does not contain any unread data). If the Receiver
is disabled (RXEN = 0), the receive buffer will be flushed and consequently the RXC bit
will become zero.

When the Receive Complete Interrupt Enable (RXCIE) in UCSRB is set, the USART
Receive Complete Interrupt will be executed as long as the RXC Flag is set (provided
that global interrupts are enabled). When interrupt-driven data reception is used, the
receive complete routine must read the received data from UDR in order to clear the
RXC Flag, otherwise a new interrupt will occur once the interrupt routine terminates.

Receiver Error Flags

The USART Receiver has three Error Flags: Frame Error (FE), Data OverRun (DOR)
and Parity Error (PE). All can be accessed by reading UCSRA. Common for the error
flags is that they are located in the receive buffer together with the frame for which they
indicate the error status. Due to the buffering of the error flags, the UCSRA must be
read before the receive buffer (UDR), since reading the UDR I/O location changes the
buffer read location. Another equality for the error flags is that they can not be altered by
software doing a write to the flag location. However, all flags must be set to zero when
the UCSRA is written for upward compatibility of future USART implementations. None
of the error flags can generate interrupts.

The Frame Error (FE) Flag indicates the state of the first stop bit of the next readable
frame stored in the receive buffer. The FE Flag is zero when the stop bit was correctly
read (as one), and the FE Flag will be one when the stop bit was incorrect (zero). This
flag can be used for detecting out-of-sync conditions, detecting break conditions and
protocol handling. The FE Flag is not affected by the setting of the USBS bit in UCSRC
since the Receiver ignores all, except for the first, stop bits. For compatibility with future
devices, always set this bit to zero when writing to UCSRA.

The Data OverRun (DOR) Flag indicates data loss due to a Receiver Buffer full condi-
tion. A Data OverRun occurs when the receive buffer is full (two characters), it is a new
character waiting in the receive Shift Register, and a new start bit is detected. If the
DOR Flag is set there was one or more serial frame lost between the frame last read
from UDR, and the next frame read from UDR. For compatibility with future devices,
always write this bit to zero when writing to UCSRA. The DOR Flag is cleared when the
frame received was successfully moved from the Shift Register to the receive buffer.

The Parity Error (PE) Flag indicates that the next frame in the receive buffer had a Parity
Error when received. If parity check is not enabled the PE bit will always be read zero.
For compatibility with future devices, always set this bit to zero when writing to UCSRA.
For more details see “Parity Bit Calculation” on page 150 and “Parity Checker” on page
157.

Parity Checker

The Parity Checker is active when the high USART Parity mode (UPM1) bit is set. The
type of Parity Check to be performed (odd or even) is selected by the UPM0 bit. When
enabled, the Parity Checker calculates the parity of the data bits in incoming frames and
compares the result with the parity bit from the serial frame. The result of the check is

Содержание ATmega8535


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ATmega8535

IBM 3270 Operation Manual preview
3270
Бренд: IBM Страницы: 86
IBM System x3630 M4 Manual preview
System x3630 M4
Бренд: IBM Страницы: 7
Octavo OSD3358-SM-RED Getting Started Manual preview
OSD3358-SM-RED
Бренд: Octavo Страницы: 28
Obihai OBi110 Quick Start Manual preview
OBi110
Бренд: Obihai Страницы: 2
Blackrock Microsystems Cerebus Instructions For Use Manual preview
Cerebus
Бренд: Blackrock Microsystems Страницы: 27
ICP DAS USA iWSN-200E Quick Start Manual preview
iWSN-200E
Бренд: ICP DAS USA Страницы: 8
Penguin Edge MVME2500 Quick Start Manual preview
MVME2500
Бренд: Penguin Edge Страницы: 2
Atmel STK501 Specification Sheet preview
STK501
Бренд: Atmel Страницы: 2
Aqua Computer Aquaduct 240 eco Operating And Assembly Manual preview
Aquaduct 240 eco
Бренд: Aqua Computer Страницы: 20
National Instruments NI 447 Series User Manual preview
NI 447 Series
Бренд: National Instruments Страницы: 80
Advantech SOM-C350 User Manual preview
SOM-C350
Бренд: Advantech Страницы: 108
Variscite VAR-SOM-MX8M-PLUS Quick Start Manual preview
VAR-SOM-MX8M-PLUS
Бренд: Variscite Страницы: 2
ETAS XETK-S21.0B User Manual preview
XETK-S21.0B
Бренд: ETAS Страницы: 68
Goobay 97790 User Manual preview
97790
Бренд: Goobay Страницы: 28
Forcepoint V10000 G4R2 Quick Start Manual preview
V10000 G4R2
Бренд: Forcepoint Страницы: 2
LevelOne GSW-0508 User Manual preview
GSW-0508
Бренд: LevelOne Страницы: 10
SET 89299 Technical Description preview
89299
Бренд: SET Страницы: 38
CAME ZG6 Installation Manual preview
ZG6
Бренд: CAME Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды