manualshive.com logo in svg

Atmel ATmega8535, Руководство пользователя

Устройство Atmel ATmega8535 - высокоэффективный микроконтроллер, обеспечивающий широкий функционал и надежную работу. Чтобы изучить все возможности устройства, скачайте бесплатное руководство пользователя с сайта manualshive.com. Получите доступ к полной информации для использования микроконтроллера на максимуме его возможностей.

Поделиться
Скачать
background image

132

ATmega8535(L) 

2502K–AVR–10/06

Asynchronous Operation of 
Timer/Counter2

When Timer/Counter2 operates asynchronously, some considerations must be taken.

•

Warning: When switching between asynchronous and synchronous clocking of 
Timer/Counter2, the timer registers TCNT2, OCR2, and TCCR2 might be corrupted. 
A safe procedure for switching clock source is:

1.

Disable the Timer/Counter2 interrupts by clearing OCIE2 and TOIE2.

2.

Select clock source by setting AS2 as appropriate.

3.

Write new values to TCNT2, OCR2, and TCCR2.

4.

To switch to asynchronous operation: Wait for TCN2UB, OCR2UB, and
TCR2UB.

5.

Clear the Timer/Counter2 Interrupt Flags.

6.

Enable interrupts, if needed.

•

The Oscillator is optimized for use with a 32.768 kHz watch crystal. Applying an 
external clock to the TOSC1 pin may result in incorrect Timer/Counter2 operation. 
The CPU main clock frequency must be more than four times the oscillator 
frequency.

•

When writing to one of the registers TCNT2, OCR2, or TCCR2, the value is 
transferred to a temporary register, and latched after two positive edges on TOSC1. 
The user should not write a new value before the contents of the temporary register 
have been transferred to its destination. Each of the three mentioned registers have 
their individual temporary register, which means that, e.g., writing to TCNT2 does 
not disturb an OCR2 write in progress. To detect that a transfer to the destination 
register has taken place, the Asynchronous Status Register – ASSR – has been 
implemented.

•

When entering Power-save or Extended Standby mode after having written to 
TCNT2, OCR2, or TCCR2, the user must wait until the written register has been 
updated if Timer/Counter2 is used to wake up the device. Otherwise, the MCU will 
enter sleep mode before the changes are effective. This is particularly important if 
the Output Compare 2 interrupt is used to wake up the device, since the output 
compare function is disabled during writing to OCR2 or TCNT2. If the write cycle is 
not finished, and the MCU enters sleep mode before the OCR2UB bit returns to 
zero, the device will never receive a Compare Match interrupt, and the MCU will not 
wake up.

•

If Timer/Counter2 is used to wake the device up from Power-save or Extended 
Standby mode, precautions must be taken if the user wants to re-enter one of these 
modes: The interrupt logic needs one TOSC1 cycle to be reset. If the time between 
wake-up and re-entering sleep mode is less than one TOSC1 cycle, the interrupt will 
not occur, and the device will fail to wake up. If the user is in doubt whether the time 
before re-entering Power-save or Extended Standby mode is sufficient, the following 
algorithm can be used to ensure that one TOSC1 cycle has elapsed:

1.

Write a value to TCCR2, TCNT2, or OCR2.

2.

Wait until the corresponding Update Busy Flag in ASSR returns to zero.

3.

Enter Power-save or Extended Standby mode.

•

When the asynchronous operation is selected, the 32.768 kHz Oscillator for 
Timer/Counter2 is always running, except in Power-down and Standby modes. After 
a Power-up Reset or wake-up from Power-down or Standby mode, the user should 
be aware of the fact that this Oscillator might take as long as one second to stabilize. 
The user is advised to wait for at least one second before using Timer/Counter2 
after Power-up or wake-up from Power-down or Standby mode. The contents of all 
Timer/Counter2 Registers must be considered lost after a wake-up from Power-

Содержание ATmega8535


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ATmega8535

Hal Communications RS2100 Instruction Manual preview
RS2100
Бренд: Hal Communications Страницы: 25
Belkin F5D9001 Series Manual preview
F5D9001 Series
Бренд: Belkin Страницы: 72
Supermicro SAS-827HD User Manual preview
SAS-827HD
Бренд: Supermicro Страницы: 16
JETWAY HBJC924R3288DG2NS Series Quick Installation Manual preview
HBJC924R3288DG2NS Series
Бренд: JETWAY Страницы: 6
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Бренд: National Instruments Страницы: 130
Element14 Wireless Connectivity Cape Quick Start Manual preview
Wireless Connectivity Cape
Бренд: Element14 Страницы: 2
Comelit IPNVR004BPOE Manual preview
IPNVR004BPOE
Бренд: Comelit Страницы: 19
Cypress Semiconductor CY7C1410JV18 Specification Sheet preview
CY7C1410JV18
Бренд: Cypress Semiconductor Страницы: 26
Noraxon TeleMyo 2400T V2 User Manual preview
TeleMyo 2400T V2
Бренд: Noraxon Страницы: 52
IBM Nways 2216 Service And Maintenance Manual preview
Nways 2216
Бренд: IBM Страницы: 168
Gigamon GigaVUE H Series Hardware Installation Manual preview
GigaVUE H Series
Бренд: Gigamon Страницы: 55
Omnitron Systems Technology iConverter GX/F User Manual preview
iConverter GX/F
Бренд: Omnitron Systems Technology Страницы: 2
KEB 1MF5280-7008 Instruction Manual preview
1MF5280-7008
Бренд: KEB Страницы: 32
Advantage Boost Box Setup Manual preview
Boost Box
Бренд: Advantage Страницы: 4
Advantech AIMB-788 User Manual preview
AIMB-788
Бренд: Advantech Страницы: 114
iSMA CONTROLLI SfAR-S-16DO User Manual preview
SfAR-S-16DO
Бренд: iSMA CONTROLLI Страницы: 20
StarTech.com 8STMPEX1394B3 Instruction Manual preview
8STMPEX1394B3
Бренд: StarTech.com Страницы: 8
StarTech.com SATDUP13 User Manual preview
SATDUP13
Бренд: StarTech.com Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды