AT-UHD-SW-510W
46
The Web GUI
Firewall Mode
This feature is only available when the Wifi mode is set to
Access Point
.
Click the
Firewall Mode
drop-down list to select the desired mode.
This feature allows control of incoming and outgoing network traffic.
The AT-UHD-SW-510W provides the following firewall modes:
Block Private
Network
,
Block Internet
,
Block All
, and
None
.
WiFi tab
Mode
Select this mode to use the AT-UHD-SW-510W as a Wireless Access Point
(WAP).
Firewall Mode
This option is unique to
Access Point Mode
. Refer to the Firewall Mode option, below, for more information.
SSID
The SSID assigned to the AT-UHD-SW-510W. The SSID name can be changed under the
General page (page 34)
.
Password
Enter the password, required to connect to the AT-UHD-SW-510W. The default password is
88888888
.
Hide Password on OSD
By default, the password will be displayed on the OSD. Check this box to mask the password.
Channel
Enter the desired wireless channel in this field. Consult with a network administrator for assistance, if required.
Setting
Description
None
Select this option to disable the firewall on the
AT-UHD-SW-510W and allow all incoming and
outgoing network traffic.
Block Private Network
Select this option to prevent unauthorized
clients from accessing the AT-UHD-SW-510W.
Block Internet
Allows wireless access to the AT-UHD-SW-
510W but prevent Internet access (Google,
YouTube, etc).
Block All
All outbound network traffic is blocked.
Setting
Description
Access Point
Select this option to configure the AT-
UHD-SW-510W as a Wireless Access
Point, allowing other wireless devices to
connect to the same wired network as the
AT-UHD-SW-510W.
Connect
Select this mode of to the AT-UHD-SW-
510W to the specified SSID of a wireless
host.
Disabled
Select this mode to disable Wi-Fi on the
AT-UHD-SW-510W.
