![Atlona AT-UHD-SW-510W Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/atlona/at-uhd-sw-510w/at-uhd-sw-510w_user-manual_3002786013.webp)
AT-UHD-SW-510W
13
Installation
6.
Connect a 3.5 mm analog audio cable from an analog source to the
AUDIO IN
port. This audio source can be
used to embed analog audio on any of the input sources.
7. Connect an Ethernet cable from the
LAN
port to the Local Area Network (LAN).
8. Connect an Ethernet cable from the
HDBaseT
port to an HDBaseT receiver unit, such as the AT-UHD-EX-100CE-
RX-PSE.
9. Connect the included 5-pin captive screw block to the
AUDIO OUT
connector.
10. Connect the included power supply to this power receptacle and connect the included power cable to an
available electrical outlet.
11. Follow the on-screen instructions to complete the installation procedure.
Connection Instructions
1.
Connect a USB-C cable from a source to the
USB-C (1)
port.
2. Connect a DisplayPort cable from a source to the
DP IN (2)
port.
3. Connect up to two UHD/HD sources, using HDMI cables, to the
HDMI IN (3)
and
HDMI IN (4)
ports.
4. Connect an HDMI cable from the
HDMI OUT
port to a UHD/HD display.
5.
Connect up to two USB wireless antenna modules to the identified
USB (WiFi)
ports, below. Two USB wireless
antennas are included.
WiFi
(1) supports Google Cast™ and Apple AirPlay®. The
MIRACAST
port (2) only
supports Miracast™. The
AUX
port is reserved for obtaining the IP address of the unit. Refer to
Getting the IP
Address (page 15)
for more information.
IMPORTANT:
Only use Atlona Wi-Fi USB modules. Other Wi-Fi modules may not be supported by
this product.
USB-C
DP
HDMI 3
HDMI 4
BYOD
DISPLAY
INPUT
AT-UHD-SW-510W
LAN
DC 24V
HDBaseT OUT
HDMI OUT
HDMI IN
DP IN
USB-C IN
2
3
4
1
RELAY
RS-232
TRIGGER I/O
MIRACAST
WiFi
AUX
AUDIO
OUT
L
R
IN
USB
+
C1 COM C2
RX
P
TX
+
+
USB
USB
USB
2
1