Atlona AT-OPUS-RX41 Скачать руководство пользователя страница 9

Страница: 9 / 46

AT-OPUS-RX41

The Atlona

AT-OPUS-RX41

is a 4×1 switcher and receiver for 4K high dynamic range (HDR) formats. It features three

HDMI inputs, plus an HDBaseT input for receiving video, embedded audio, control signals, power, and Ethernet over

distances of up to 330 feet (100 meters). Supporting 4K/UHD @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI

data rates up to 18 Gbps, the OPUS-RX41 is the perfect complement to an Atlona Opus™ Series matrix switcher in

whole-house AV applications allowing display of 4K HDR content from either the matrix or one of the connected local

sources.

The OPUS-RX41 includes a number of key features to help simplify residential deployments. Extension of CEC, IR,

and RS-232 signals over HDBaseT allows a control system connected to the OPUS-RX41 to select inputs on the

matrix or control its sources, and allows the matrix to control the local room display. A handheld IR remote control

is included for power and input selection on the OPUS-RX41. Advanced HDMI Audio Return Channel (ARC) routes

audio from a smart TV to both the local TOSLINK connection as well as HDBaseT. EDID management, selectable 4K

to 1080p downscaling, and HDCP 2.2 support with selectable down-conversion to HDCP 1.4 ensures compatibility

with legacy displays. Remote power allows the device to be powered by an Opus matrix switcher, for installation

flexibility at a display or projector.

Introduction

Features

Package Contents

•

4×1 switcher with three HDMI inputs and one HDBaseT input

•

HDBaseT input receives 4K HDR, control, and Ethernet up to 330 feet (100 meters) with Category 6/6a/7 cable

•

4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling

•

HDMI inputs are compatible with 4K HDR10 and Dolby® Vision™ @ 60 Hz, as well as HLG (Hybrid Log-Gamma)

for 60p HDR broadcast services and the HDBaseT input supports Dolby Vision @ 30 Hz

• HDCP 2.2 compliant
• Automatic input selection using hot plug detect and video detection technology
•

TCP/IP, RS-232, and IR control for compatibility with Atlona Velocity™ and third-party control systems

• Advanced HDMI ARC
•

HDBaseT Control Extension

• Remote power
• Downscaling

1 x AT-OPUS-RX41

1 x 4-pin captive screw connector

1 x 5-pin captive screw connector

2 x Mounting plates

4 x Rubber feet

4 x Screws

1 x IR remote control

1 x DC 5V power supply

1 x IEC cord

1 x Installation Guide

Содержание AT-OPUS-RX41















































Результаты поиска

Содержание AT-OPUS-RX41

Отзывы:

Похожие инструкции для AT-OPUS-RX41

Бренды по названию

Популярные бренды

Atlona AT-OPUS-RX41, Руководство пользователя

Результаты поиска

Содержание AT-OPUS-RX41

Отзывы:

Похожие инструкции для AT-OPUS-RX41

Бренды по названию

Популярные бренды