Atlona AT-OME-TX21-WP-E Скачать руководство пользователя

Страница: 32 / 46

AT-OME-TX21-WP-E

The Web GUI

Power on delay timer (Sec.)

Sets the time interval, in seconds, between when the system is powered-on, and when system can re-enter the Auto

Power Off state. All display-on commands are triggered immediately after an A/V source is connected. Range: 0 to

300.

Control Type

Sets the control method for sending commands. The following options are available: RS-232, IP, CEC.

Feedback Verify

Sets the feedback verification state. Click the toggle to enable or disable this feature. The following options are

available.

Setting

Description

RS-232

RS-232 is used to send commands.

Commands are sent over IP.

CEC

Uses CEC to send commands.

Setting

Description

This is the default setting. The AT-OME-TX21-WP-E will make four attempts to

send the command, if the feedback string is not acknowledged. After the fourth

attempt, the process will fail.

Off

Sends the command and ignores the feedback string.

TCP/IP Settings of Controlled Devices

IP Mode

Click this drop-down list to select the login mode.

Setting

Description

Non-login

Does not require a username and password when using TCP/IP to control the

display.

Requires a username and password to control the display through TCP/IP.

IP Address

Enter the IP address of the device in this field.

Port

Enter the listening port of the device in this field.

Username

Enter the username for login. If the

IP Mode

is set to

Non-Login

, then this information will not be required.

Password

Enter the password for login. If the

IP Mode

is set to

Non-Login

, then this information will not be required.

Save

Click this button to save all changes in this window group.

Содержание AT-OME-TX21-WP-E















































Результаты поиска

Содержание AT-OME-TX21-WP-E

Отзывы:

Похожие инструкции для AT-OME-TX21-WP-E

Бренды по названию

Популярные бренды

Atlona AT-OME-TX21-WP-E, Руководство пользователя

Результаты поиска

Содержание AT-OME-TX21-WP-E

Отзывы:

Похожие инструкции для AT-OME-TX21-WP-E

Бренды по названию

Популярные бренды