AT-OME-TX21-WP-E
19
1. Press and release the
INPUT
button on the front panel to toggle between the
HDMI
and
USB-C
inputs.
The
HDMI
input is selected as the factory-default setting, as shown below.
After the
INPUT
button is pressed, the input will be switched to the opposite input. In this example, the
USB-C
port is now the active input and will be indicated by the
USB-C
LED indicator.
2. Press the
INPUT
button to return to the previous input.
Manual input switching can also be performed under the
A/V Settings page (page 29)
of the web GUI, by
clicking the
Input Selection
drop-down list and selecting the desired input. In addition, the
x1AVx1
command
can also be used. Refer to the
Application Programmer’s Interface
for more information.
Basic Operation
Switching between the
HDMI
and
USB-C
ports can be performed either manually or automatically. The following
section covers both methods.
Input Switching
AT-OME-TX21-WP-E
HDMI
USB-C
INPUT
USB-C LINK
HDMI PWR AUTO
OMEGA
TM
RESET
IP
TEST
FW
AT-OME-TX21-WP-E
HDMI
USB-C
INPUT
USB-C LINK
HDMI PWR AUTO
OMEGA
TM
RESET
IP
TEST
FW
Manual Switching
HDMI LED indicator
USB-C LED indicator
NOTE:
The AT-OME-TX21-WP-E retains the currently selected input, even after the unit is powered-
off then powered-on.
