AT-OME-TX21-WP-E
18
LED
Indicators
The following table provides a listing of front-panel LED indicators and their status:
Basic Operation
LED
Description
PWR
Off
• The AT-OME-TX21-WP-E is not powered.
•
Check the Ethernet cable, between the AT-OME-TX21-WP-E and the
receiver, for possible damage or loose connections.
• When the AT-OME-TX21-WP-E is powered-down through the API, this
LED indicator will be in the “off” state, even through power is being
supplied over Ethernet, from the receiver.
Green
• The AT-OME-TX-21-WP-E is powered.
Flashing
•
This LED indicator will flash four times to indicate that the AT-OME-TX-
21-WP-E is powering-down. Once powered down, the LED will be in
the “off” state.
•
This LED indicator will flash four times to indicate that the AT-OME-TX-
21-WP-E is powering-up, from a power-down state. Once the AT-
OME-TX21-WP-E is powered, the LED will glow solid green.
HDMI
Off
• HDMI is not the active input.
Green
•
HDMI is the active input. Note that this LED indicator does not
indicate the presence of an video signal.
USB-C
Off
•
USB-C is not the active input.
Green
•
USB-C is the active input. Note that this LED indicator does not
indicate the presence of an video signal.
LINK
Off
•
No link exists between the AT-OME-TX21-WP-E and the receiver.
•
Check that an Ethernet cable is connected between the HDBaseT port
on the receiver and the AT-OME-TX21-WP-E.
•
Verify that the Ethernet cable is not damaged and all connections are
secure.
Green
•
Link integrity is good.
Flashing
•
Indicates that the link between the AT-OME-TX21-WP-E and the
receiver is not stable.
AUTO
Off
•
Auto-switching is disabled.
Green
•
Auto-switching is enabled.
NOTE:
Powering-down the AT-OME-TX21-WP-E using
either the API or the web GUI will not affect this LED
indicator. This indicator only reports the state of the
physical connection between the AT-OME-TX21-WP-E and
the receiver.
