AT-HDVS-200-RX
34
The Web GUI
Gateway
Enter the gateway (router) address in this field. This field will only be available if
IP Mode
is set to
STATIC IP
.
Telnet Port
Enter the Telnet port in this field.
Telnet Login Mode
Click this toggle to set the login mode to
ON
or
OFF
. If this feature is set to on, then the AT-HDVS-200-RX will
prompt for both the username and password. Use the same credentials as the web GUI.
Telnet Timeout
Click this drop-down list to select the timeout interval, in seconds, before the Telnet connection is automatically
closed after no activity.
Broadcast
By default, broadcast mode is set to off. When set to
ON
, changes in the web GUI will also be affected on the
control system (if connected), via TCP/IP. To separate control between web GUI and Telnet, set this feature
OFF
.
Reset to Default
Click the
Factory Default
button to set the AT-HDVS-200-RX to factory-default settings.
Firmware Update
Click the
Choose File
button to select the firmware file, when upgrading the firmware on the AT-HDVS-200-RX.
Once the firmware file is selected, click the
Update
button. Refer to
Updating the Firmware (page 53)
for more
information.
Valens Update
Click the
Choose File
button to select the Valens firmware file, when upgrading the Valens chip on the AT-HDVS-
200-RX. Once the firmware file is selected, click the
Update
button.
