manualshive.com logo in svg

Atlona AT-HDVS-200-RX, Руководство пользователя

Поделиться
Скачать
Atlona AT-HDVS-200-RX Скачать руководство пользователя страница 23

AT-HDVS-200-RX

23

The AT-HDVS-200-RX includes a built-in web GUI.  Atlona recommends that the web GUI be used to set up the

 

AT-HDVS-200-RX, as it provides intuitive management of all features.

The AT-HDVS-200-RX is shipped with DHCP enabled.  Once connected to a network, the DHCP server will 

automatically assign an IP address to the unit.  Use an IP scanner to determine the IP address of the AT-HDVS-

200-RX.  If a DHCP server is not available or if a static IP address is desired, it can be assigned using the 

IPStatic

 

command or through the 

System page (page 33)

 of the web GUI.  The default static IP address of the AT-HDVS-

200-RX is 192.168.1.254.

Introduction to the 

Web GUI

1. 

Launch a web browser.

2. 

In the address bar, type the IP address of the AT-HDVS-200-RX.

3.  The 

Login

 page will be displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.  Type 

root

, using lower-case characters, in the 

Username

 field.

5.  Type 

Atlona

 in the 

Password

 field.  The password field is case-sensitive.  When the password is entered, it will be 

masked.  The password can be changed, if desired.  Refer to the 

Config page (page 18)

 for more information.

6.  Click the 

Submit

 button or press the ENTER key on the keyboard.

The Web GUI

Содержание AT-HDVS-200-RX































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды