AT-GAIN-120
40
Appendix
Inser
t dir
ection
6. Locate the included AT-GAIN-NET faceplate with the
INPUT
port and install the faceplate using the screws from
Step 2, as shown below. Do not over-tighten the screws using high-torque devices, as this may cause damage
to the screws or the faceplate assembly.
7. Card installation is complete.
8.
Connect the power cable to the AT-GAIN-120.
9.
Connect an Ethernet cable, with an encoded digital audio stream, to the
INPUT
port. Refer to the
Network Audio
(page 22)
for information on using Dante and AES67 audio streams.
Included AT-GAIN-NET Faceplate
