AT-GAIN-120
34
Appendix
Updating the Firmware
The AT-GAIN-120 can only be updated either through the web GUI or using the mini-USB port on the front panel.
Required items:
• Firmware
•
IP address of the AT-GAIN-120
• Computer on the same network as the AT-GAIN-120
•
Username and password to access the web GUI
1.
Verify that an Ethernet cable is connected between the AT-GAIN-120 and the network. The computer used to
access the web GUI must be on the same network as the AT-GAIN-120.
2.
Type the IP address of the AT-GAIN-120 into the web browser, as shown in the example below.
3.
The login screen will be displayed. Login using the username and password. The default login credentials are:
Username:
admin
Password:
Atlona
Web GUI
IMPORTANT:
As of this writing, Google Chrome is the only browser that is supported for firmware
updates. Other browsers will be supported in future versions of firmware.
