manualshive.com logo in svg

Atlas SLP-7K, Руководство пользователя

Поделиться
Скачать
Atlas SLP-7K Скачать руководство пользователя страница 7

REV. 01 2012

8 / 30 

 

CHAPTER 4 - PRODUCT DESCRIPTION 

4.1 LIFT 

(ref. Figure 1)

The lift has been designed for the lifting of motor-vehicles and for making them stand at any level 
between the minimum and maximum height.
The maximum lifting weight, including any additional load on the vehicle, is as specified on the 
serial plate.
All mechanical frames, such as platforms, extensions, base frames and arms have been built in steel 
plate to make the frame stiff and strong while keeping a low weight
The electro hydraulic operation is described in detail in chapter 8. 
This chapter describes the lift’s principal elements, allowing the user to be familiar with the machine.
As shown in figure 2, the lift is composed of two platforms: P1 (1) and P2 (2) each equipped with the 
drive-on/off ramps (3) which can be locked to the platforms as extensions, anchored to the ground by 
means of bases (4). 
Platforms are linked to the base by means of a scissor lifting system. 
The lifting system of each platform is composed of N.4 arms: two inferior (5) and two superior (6), 
and a couple of cylinders: master (7) and slave (8). The mechanical safety (9) is built on each runway 
and can be locked and released by means of the air cylinder. 
Motion is transmitted by a lever system, from the cylinders to the lever (10). 
Lowering and lifting are carried out by means of a control unit (11), placed next to the lift. 
Two limit switches are installed on the P2 base: one for the top position and one for the safety height, 
protected by a cover (12).  

Figure 1 - LIFT

1

2

3

4

5

8

6

7

10

11

12

9

Содержание SLP-7K






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды