Atlas SLP-7K, Руководство пользователя

Страница: 24 / 29

REV. 01 2012
25 / 30
CHAPTER 8 - OPERATION AND USE
Never operate the lift with any person or equipment below.
Never exceed the rate lifting capacity.
If an anchor bolts become loose or any component of the lift is found to be
defective, DO NOT USE THE LIFT until repairs are made.
Do not permit the electric control unit to get wet!
8.1 CONTROLS
Figure 17 - CONTROL PANEL
Controls for operating the lift are:
POWER SWITCH (1)
The power switch can be set in two positions:
¾
0 position: the lift electric circuit is not powered; the switch can be padlocked to prevent the
use of the lift.
¾
1 position: the main electric circuit is powered.
FUNCTION INDICATOR (2)
¾
When ON lights, it shows that the electric circuit is powered.
¾
When lights, it shows that the top limit switch is working.
¾
When lights, it shows that the safety height limit switch is working.
¾
When lights, it shows that the power unit is working.
¾
When lights, it shows that the lift has started the final lowering.
¾
When lights, it shows the electric circuit is connected incorrectly or has a malfunction.
BEEPER (3)
LIFTING BUTTON (4)
¾
When pressed, the electric circuit for the lift operates the motor and hydraulic circuit to raise
6
5
2
3
4
1