Loeki and Bello User Guide
4. Operation
No part of this User Guide may be reproduced, stored in a retrieval system, or published, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Atlas Revalidatie Techniek BV.
© 2008 Atlas Revalidatie Techniek B.V.
17
4.2.7
The height, depth and width of the leg supports (optional)
Height
•
The screws for adjusting the height of the leg supports are located on the bars of the armrests
(see illustration 25). Hexagonal key (Allen key) number 6 is required to make the adjustment.
•
Hold on to the bar with one leg support with one hand and loosen the screw for adjusting the
height with the other hand. Position the bar with the leg support at the desired height and
retighten the adjusting screw securely. Position the
bar with the leg support on the other side at the
same height. Verify that the leg supports have been
securely tightened.
•
If necessary, the height must be adjusted so that the
leg support is positioned in line with the child’s upper
leg. Make sure that they are not positioned lower.
Depth
•
The screws for adjusting the depth of the leg supports are located at the side of the leg supports
(see illustration 26). Hexagonal key (Allen key) number 6 is required to make the adjustment.
•
Hold on to one of the leg supports with one hand
and loosen the screw for adjusting the depth with the
other hand. Position the leg support at the desired
depth and retighten the adjusting screw securely.
Adjust the other leg support to be in the same
position. Verify that the leg supports have been
securely tightened.
•
If necessary, the depth of the leg supports must be
adjusted so that when the child is seated at the back
of the seat, the leg supports fit snugly against the knees.
Width
•
The screws for adjusting the width of the leg supports are located at the front of the leg supports
(see illustration 27). Hexagonal key (Allen key) number 6 is required to make the adjustment.
•
Hold on to one of the leg supports with one hand and loosen the screw for adjusting the width
with the other hand. Position the leg support at the desired width and retighten the adjusting
screw securely. Adjust the other leg support to be in
the same position. Verify that the leg supports have
been securely tightened.
•
If necessary, the width must be adjusted so that
when the child is seated at the back of the seat with
the legs slightly apart, the leg support is positioned in
front of the knee. To make sure that the leg support
fits snugly along the sides, bend the side plates,
without pinching.
Illustration 25:
Adjusting the height of the leg supports.
Illustration 26:
Adjusting the depth of the leg supports.
Illustration 27:
Adjusting the width of the leg supports.
