Loeki and Bello User Guide
4. Operation
No part of this User Guide may be reproduced, stored in a retrieval system, or published, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Atlas Revalidatie Techniek BV.
© 2008 Atlas Revalidatie Techniek B.V.
14
Seat width
•
The screw for adjusting the seat’s width is located at the side and
bottom of the seat (see illustration 16). Hexagonal key (Allen key)
number 6 is required to make the adjustment. On the right hand
side, it may be necessary to tilt the seat to the front in order to be
able to reach the adjusting screw.
•
Loosen the screw for adjusting the seat’s width and place the
armrest in the desired position. Place the other armrest at exactly
the same distance. Be sure to retighten the adjusting securely.
Verify that the armrests have been securely tightened.
•
Make sure that the cushions in the seat fit at the height of the
child’s pelvis.
4.2.3
The height of the armrests
Height of the armrests
•
The screw for adjusting the height of the armrests is located
below the armrests (see illustration 17). Hexagonal key (Allen
key) number 6 is required to make the adjustment.
•
Hold on to the armrest with one hand and loosen the screw for
adjusting the height of the armrest with the other hand. Position
the armrest at the desired height and retighten the adjusting
screw securely. Push down on the armrest to verify that it is
properly secured. Place the other armrest at exactly the same
height.
•
The armrests must be positioned so that the child is able to rest
his/her arms on the armrests while keeping the shoulders
relaxed. If a tray table is to be attached to the armrests, the
screws for adjusting the height of the armrests can be used to set
the height of the tray table.
4.2.4
The height, depth and angle of the footrest
Height
•
The screw for adjusting the height of the footrest is located at the
side of the footrest (see illustration 18). Hexagonal key (Allen key) number 6 is required to make
the adjustment.
•
Hold on to the footrest with one hand and loosen the screws for adjusting the height with the
other hand. Place the footrest in the desired position and retighten the adjusting screws
securely. Make sure that the left and right sides of the footrest are positioned at the same
height. Verify that the footrest is securely fastened by pushing down on it with your hands.
•
The height of the footrest must be adjusted so that the child is seated with the knees bent at a
90° angle.
Illustration 16:
Adjusting the seat’s width.
Illustration 17:
Adjusting
the
height
of
the
armrests.
Illustration 18:
Adjusting the height of the footrest.
