Loeki and Bello User Guide
4. Operation
No part of this User Guide may be reproduced, stored in a retrieval system, or published, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Atlas Revalidatie Techniek BV.
© 2008 Atlas Revalidatie Techniek B.V.
18
4.2.8
The gas spring
•
The screws for fastening the gas spring are located in the middle of the subframe.
•
This adjustment is only carried out in exceptional circumstances. When the chair is delivered, it
is already set at the right height.
•
Position a book/wooden block in the middle of
the subframe, right below the gas spring (see
illustration 28). Loosen both adjusting screws.
Stand on the frame as a result of which the
frame shifts down relative to the gas spring.
Retighten both adjusting screws securely. Push
down on the seat to verify that the gas spring
does not shift in its mounting.
