Atlas fan company Donaire YG480-DA Скачать руководство пользователя страница 15

The Atlas 12 month in-home warranty covers Atlas ceiling fans installed within the coverage of our network of 

service agents in cases where the product fails due to defective materials or workmanship. This warranty does not 

cover installation faults, house wiring faults, loose blades or fittings or damage of any kind. Claims regarding 

corrosion damage are subject to case by case appraisal. In areas outside coverage of the Atlas service agents, 

Atlas will reimburse consumers a standard fee of $82.50 (inc. GST) for using their own electrician. All service 

requests must be arranged with the warranty department before calling your electrician. Under no circumstances 

will reimbursement be made for call-out fees or other costs without prior approval. When installed as recommended 

by Atlas (using an isolation switch) a fan or remote control can be switched off at the wall in case of a fault. If the 

product cannot be turned off because an isolation switch is not fitted, any electrical costs involved in disconnecting 

the product while awaiting warranty service are to be borne solely by the consumer. 

IN-HOME (ON-SITE) WARRANTY?

Atlas will supply parts only, shipped directly to the consumer. Please note the labour associated with installation of 

these parts, or associated electrical costs of removing and reinstalling the product to affect a repair is borne by the 

consumer.

PARTS ONLY WARRANTY?

These warranties will only apply where; 

•     The fan was purchased and installed in Australia. 

•     You notify Atlas of the alleged defect in the Atlas fan, its motor or its component parts immediately upon you 

experiencing, noticing or learning of the alleged defect; 

•     You provide to Atlas a copy of your ‘Proof of Purchase’ (Sales receipt) verifying when and from whom the Atlas 

fan was purchased and a copy of your ‘Proof of Qualified Installation’ (Electrical Safety Certificate) verifying 

when and by whom the Atlas fan was installed. 

WHERE THE WARRANTIES WILL APPLY 

All rights, warranties, conditions and remedies implied by legislation or the common law that are able to be lawfully 

excluded in respect of Your Atlas fan are excluded. However nothing in this clause or the manufacturer’s 

warranties exclude, restrict or modify any condition, warranty, right or remedy, which is conferred on You by the 

ACL Act 2010 or any other applicable Australian consumer legislation ('Acts") or the common law and which is not 

lawfully able to be excluded, restricted or modified. 

IMPLIED WARRANTY 

In addition to any limitations set out above, the warranties are limited to, at Atlas’s sole option, the replacement of 

the Atlas fan or defective part or the supply of an equivalent product or part; the repair of the Atlas fan or defective 

part or the payment of the cost of having the Atlas fan or defective part repaired; or the payment of the purchase 

price of a replacement Atlas fan or defective part or an equivalent product or part. 

Where Atlas or its authorised agents provide any services to you under or pursuant to the manufacturer’s 

warranties, the application of the manufacturer’s warranties to such services is limited, at Atlas 's sole option, to the 

supplying of those services again, or the payment of the cost of having those services supplied again. 

LIMITATION OF WARRANTIES 

The warranties above are void and Atlas disclaims any liability of whatsoever any nature where: 

•     The Atlas fan is not purchased by you in Australia and installed in Australia;

•     The Atlas fan is not installed correctly in accordance with Atlas’s installation guide, or is installed in an 

unsuitable location; 

•     The Atlas fan is removed from the particular location in which it was originally installed following the original 

purchase, except where that removal: 

         >

     is expressly authorised by Atlas or Atlas’s authorised agent; and 

         >

     does not cause, contribute to or result in, any further Defects to the Atlas fan or any of its component parts 

or other parts; or 

•     The Defect is caused by: 

         >

     the improper, incorrect or incomplete installation: 

         >

     the improper or incorrect use or adjustment of the Atlas fan by you or any third party; 

         >

     any attempted or completed maintenance, repair or modification carried out on the Atlas fan or its 

component parts or other parts by you or   any unauthorized third party; 

         >

     the direct or indirect acts of you or any third party; 

         >

     normal wear and tear to the Atlas fan or any of its parts; 

         >

     faulty or unsuitable wiring in the structure to which the Atlas fan is fixed or connected; 

         >

     inadequate support in the structure to which the Atlas fan is fixed or connected; 

         >

     blown fuses or damage caused by force-majeure, electrical surges, lightning, power grid fluctuations, or by 

connection to alternative power supply sources (such as solar inverters etc) or 

         >

     water damage and or moisture. 

WHERE THE WARRANTY WILL NOT APPLY 

Содержание Donaire YG480-DA

















Отзывы: