manualshive.com logo in svg

Atlas Copco SF 1, Инструкция

Поделиться
Скачать
Atlas Copco SF 1 Скачать руководство пользователя страница 31

5.2

Service kits

Service kits

For overhauling and for preventive maintenance, a wide range of service kits is available. Service kits
comprise all parts required for servicing the component and offer the benefits of genuine parts while
keeping the maintenance budget low.

Consult the Spare Parts List for part numbers.

5.3

Disposal of used material

Used filters or any other used material (e.g. desiccant, lubricants, cleaning rags, machine parts, etc.) must
be disposed of in an environmentally friendly and safe manner, and in line with the local recommendations
and environmental legislation.

Electronic components are subject to the EU Directive 2012/19/EC for Waste Electrical and Electronic
Equipment (WEEE). As such, these parts must not be disposed of at a municipal waste collection point.
Refer to local regulations for directions on how to dispose of this product in an environmental friendly
manner.

Instruction book

2920 7110 11

29

Содержание SF 1























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды