CAUTION Moving parts
Risk for crushed hands and fingers.
►
Never check bores or passages with hands or
fingers.
Operation, precautions
DANGER Fire hazard
If a fire starts in the machine, it can cause injury.
►
If possible use an ABE-class powder extinguisher,
otherwise use a BE-type carbon dioxide fire
extinguisher.
DANGER Explosion hazard
When working on certain materials and when using
certain materials in machine parts, sparks and
ignition can occur. Explosions will lead to severe
injuries or death.
►
Never operate the machine in any explosive
environment.
►
Never use the machine near flammable materials,
fumes or dust.
►
Make sure that there are no undetected sources
of gas or explosives.
DANGER Electrical hazard
The machine is not electrically insulated. If the
machine is not connected correctly, serious injuries
or death may result.
►
Never place the power pack in a position where it
risks being drowned by water.
►
Ensure that the machine is earthed and that the
earth connection has been checked at regular
intervals for correct functionality. Operation of the
machine without an earth connection presents a
risk of fatal accident.
►
Use a DC-sensitive residual current circuit breaker
(RCCB) protected supply. The RCCB must be
checked for correct functionality according to the
specifications from the manufacturer.
►
Never modify the electrical plug or socket.
►
Check that the mains voltage corresponds with
the information stated on the data plate on the
machine.
►
Only cerified technicians are allowed to service
the electrical motor. Do not open any of the motor
covers. Unauthorized service work on the motor
might lead to power pack malfunction and possibly
serious injuries or death.
DANGER Electrical cable hazard
There is a risk of electrical shocks if the electrical
cable is not treated correctly, this can lead to serious
injuries or death.
►
Never move the machine by dragging the electrical
cable.
►
Disconnect the cable only by pulling the socket,
never pull the electrical cable.
►
Do not expose the electrical cable to heat, oil, and
sharp edges.
►
Make sure the electrical cable is not pinched in
doors, fences or similar.
►
Check that the electrical cable, extension cable,
and cable plug are intact and in good condition.
Never connect a damaged electrical cable to the
machine.
►
Never touch the electrical cable if it becomes
damaged while working. Disconnect the main
supply and then disconnect the electrical plug from
the socket.
WARNING Whipping hose
Hoses under pressure can whip uncontrollably if the
hose connection becomes loose. A whipping hose
can cause severe injuries. To reduce this risk:
►
Turn of the power pack before loosening the
connection of a hose.
►
Check that the hose and the connections are not
damaged.
►
Never carry or drag the machine by the hoses.
WARNING Abuse hazard
Never abuse or strike the power pack. This may
cause machine breakdown.
►
Never strike or abuse the equipment.
►
Make sure that the frame is clean and free of oil.
►
Never rest on the power pack.
►
Never throw objects on the power pack.
WARNING Cover protection
The covers of the power pack must be in place. Thin
jets of hydraulic oil under high pressure can penetrate
the skin and cause permanent injury.
►
Never operate the machine without covers.
►
Immediately consult a doctor if hydraulic oil has
penetrated the skin.
7
© 2016 Construction Tools PC AB | No. 9800 1364 01c | 2016-04-06
Original instructions
Safety and operating instructions
PP 100
