Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
PP 100 is a hydraulic power pack designed for
operating hydraulic rock drills of type RD 100. No
other use is permitted.
PP 100 is fitted with a (10 kW) electric motor. The
oil flow for PP 100 is 38 l.p.m (10 US gal/min) and
nominal pressure 120 bar (1,740 psi).
The motor is cooled by a water flow of minimum 12
l/min (US 3.2 gal/min) with a maximum temperature
of 20 ˚C and pressure below 13 bar (189 psi), in
normal operation.
See the spare parts list for accessories, spare parts
and electrical schematics. See the overhauling
instructions for service guide.
Main parts
Fluid connection side
A
B
C
D
E
A.
Hydraulic oil inlet
B.
Water outlet
C.
Hydraulic oil outlet
D.
Water inlet
E.
Reinforced cooling water outlet
Electrical connection side
K
L
I
H
G
F
M
N
O
P
J
Q
F.
Hydraulic oil volume indicator
G.
Electrical connector
H.
Emergency stop
I.
On/Off button
J.
Data plate
K.
USB memory stick connector
L.
Safety label (Top)
M.
Oil drainage
N.
LED 3, oil error
O.
LED 2, temperature error
P.
LED 1, operation error
Q.
Electrical connection label
NOTICE
Do not use the USB memory stick
connector for other than the USB stick. For the use
of the USB memory stick connector, see chapter
Advanced diagnostics.
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
© 2016 Construction Tools PC AB | No. 9800 1364 01c | 2016-04-06
Original instructions
10
PP 100
Safety and operating instructions
