6
PAGE
Repair Instructions No.163.01/96
PHE 20 / PHE 26 / PHE 200
Mounting the
spindle gear
1
Push the spindle gear (6) completely with
greased balls (5), disc, cup springs (7),
ring (8), and locking ring onto the spindle.
2
Push back the ring (8) as well as the cup
springs (7) with aid of the assembly tool (9)
(service tool) and mount the locking ring with
aid of special pliers.
3
Insert the complete spindle into the gear
box.
4
Mount the seal ring (4), the ball bearing, the
locking ring, the disc (3), bearing cover (2),
the locking ring, as well as the disc (1).
Mounting the set
collar
1
Insert the disc (2). Insert the rolls (3) with
grease.
2
Applicable for the new SDS-Plus-System
(A): the rolls (5) are replaced by balls.
3
Slide on the sleeve (4) together with the
ball.
4
Mount the spring sleeve (5), the disc, the
O-ring (6), the set collar, the cover (8), the
locking ring, and the O-ring (9).
5
Insert the small intermediate wheel (7) into
the gear box and fit it together with the
gasket (1) to the bearing end plate.
1
2 3
4
7
8 7
5
6
6
9
2
2
3
5
6
4
8
9
1
7
A
3
Содержание PHE 20
Страница 1: ......
