Atlas Copco PHE 20, Инструкции по ремонту

Страница: 6 / 8

5
PAGE
Repair Instructions No.163.01/96
PHE 20 / PHE 26 / PHE 200
Assembly
Pre-assembling
the reduction
gear shaft
1
Pre-assemble the reduction gear shaft (1),
the reduction gear wheel (2), the bearing
cover (3), and the ball bearing (4).
2
Press the pre-assembled components
into the bearing end plate (7). Fasten it
with additionally secured screws (Omnifit).
3
Measure the center distance of the sun
wheel (6). If necessary, correct the dis-
tance with washers.
☞
Set the center distance with aid of the
sleeve (8) (repair tool set; special tool)
to 60,5 - 0,05 mm. Check the distance
between the upper and the lower part
with aid of a feeler gauge and set the
tolerance to - 0,05 mm with washers.
4
Press on the sun wheel (6) with aid of the
repair tool set (8) (service tool).
5
Fit the complete armature to the bearing
end plate (7). Mind the right position.
6
Insert the O-ring (5) into the bearing end
plate (7).
60.5
- 0,05
4
6
7
1
3 2
5
8
6
8
8 7
1