Atlas Copco ORKA 350/450 Скачать руководство пользователя страница 7

Never use a cutting blade for any other purpose
than it is intended for.

DANGER Fuel hazard

The fuel is flammable and fuel fumes can explode
when ignited, causing serious injury or death.

Protect your skin from contact with the fuel. If fuel
has penetrated the skin, consult a qualified health
professional.

Never remove the filler cap, or fill the fuel tank
when the machine is hot.

Fill the fuel tank outdoors or in a clean and well
ventilated place, free from sparks and open
flames. Fill the fuel tank at least ten meters (30
feet) from the place where the machine is to be
used.

Release the filler cap slowly to let pressure
escape.

Never overfill the fuel tank.

Make sure the filler cap is screwed on when the
machine is used.

Avoid spilling fuel on the machine, wipe off any
spilled fuel.

Check regularly for fuel leaks. Never use the
machine if it is leaking fuel.

Never use the machine in the proximity of material
that can generate sparks. Remove all hot or
spark-generating devices before starting the
machine.

Never smoke when filling the fuel tank or when
working with the machine or servicing it.

Only store fuel in a container that is specially
constructed and approved for the purpose.

Consumed fuel and oil containers must be taken
care of and returned to the retailer.

Never use your fingers to check for fluid leaks.

DANGER Explosion hazard

If a warm machine comes into contact with
explosives, an explosion could occur. During
operating with certain materials, sparks and ignition
can occur. Explosions will lead to severe injuries or
death.

Never operate the machine in any explosive
environment.

Never use the machine near flammable materials,
fumes or dust.

Make sure that there are no undetected sources
of gas or explosives.

DANGER Exhaust gas hazard

The exhaust gas from the machine’s combustion
engine contains carbon monoxide which is
poisonous, and chemicals known to the State of
California and other authorities to cause cancer, birth
defects, or other reproductive harm. Inhalation of
exhaust fumes can cause serious injury, illness, or
death.

Never inhale exhaust fumes.

Ensure good ventilation (extraction of air by fan if
necessary).

WARNING Unexpected movements

The machine is exposed to heavy strains during
operation. If the machine breaks or gets stuck, there
may be sudden and unexpected movement that can
cause injuries.

Always inspect the machine prior to use. Never
use the machine if you suspect that it is damaged.

Make sure that the handle is clean and free of
grease and oil.

Keep your feet away from the machine.

Never sit on the machine.

Never strike or abuse the machine.

Pay attention and look at what you are doing.

7

© 2015 Construction Tools EOOD | No. 9800 1203 01b | 2015-02-05
Original instructions

Safety and operating instructions

ORKA

Содержание ORKA 350/450

























Отзывы: