Atlas Copco HiLight H4 Kd ESF, Инструкция по эксплуатации

Страница: 46 / 94

- 46 -
5.4 Engine maintenance procedures
5.4.1 General instructions
– Regularly perform maintenance work and replace
parts as indicated in the Engine Operation
Manual.
– The engine should never run before filters have
been correctly installed.
– Open the access doors of the light tower to access
the engine and perform all necessary maintenance
operations.
• Unlock the access doors by using the key.
• Open the access doors by pushing the black
push button next to the key hole.
– Regularly check the controller display, to see if a
service alarm icon (1) is present. In this case an
urgent maintenance action is requested.
Example:
– Do not smoke and maintain a safe distance from
flames and sparks while maintenance is being
carried out and when fuels and solvents are being
used.
– Carefully follow all the instructions contained in
the Engine Operation Manual that accompanies
the light tower.
5.4.2 Engine oil level check
For the intervals, see section “Maintenance schedule”
on page 39. Use Atlas Copco engine oil PAROIL E or
PAROIL Extra.
Check the engine oil level before every time that the
light tower is used. To do this you must ensure that the
machine stands on an even surface and that the engine
is not running.
1. Check the engine oil level before starting or more
than 5 minutes after stopping the engine.
2. Remove the oil level gauge, wipe it clean and
reinstall it.
3. Take the oil level gauge out again, and check the
oil level.
1
1 1 2
00_00_HiLight H4_EN.book Page 46 Monday, April 18, 2016 2:10 PM