Atlas Copco HiLight H4 Kd ESF, Инструкция по эксплуатации

Страница: 25 / 94

- 25 -
3.2.5 Transportation and positioning
of the light tower onto vehicles
As well as the ability to be towed, the light tower can
also be easily lifted and moved to difficult areas
thanks to its central lifting eye and fork lift holes in its
frame. All that is needed is a fork lift truck or a
mechanical arm.
The fork lift holes and the lifting eye can also be used
to place the light tower onto trucks for road
transportation.
If the light towers are carried on trucks or similar
vehicles:
1. Ensure that the machine is stable and secure.
2. Check that the light tower is placed perfectly
horizontally (check the levels on top of the unit).
3. To ensure stability, use the fork lift slots (1) and
lifting eye (2) to fix the light tower to the transport
vehicle.
4. Use straps or other means of anchoring, provided
that these do not affect the machine's safe
transportation and integrity.
5. It is recommended that the machine is covered by
a tarpaulin to protect it against bad weather
conditions if it is transported on an open truck.
3.3 Installation
3.3.1 Indoor installation
If the machine is operated in a closed environment,
make sure that there is enough ventilation to remove
the exhaust gases from the room where the engine is
running; also ensure that the exhaust gases are
discharged at a distance that will not allow them to be
drawn back into the engine. Install an exhaust pipe of
sufficient diameter to duct the engine exhaust towards
the outside. Check for sufficient ventilation so that the
cooling air is not re-circulated.
Place the machine at least at 1m from each wall and
the ceiling and provide suitable openings to allow
sufficient air flow for adequate cooling and good
engine combustion.
1 1
2
For more information about indoor
installation, consult your local Atlas
Copco dealer.
00_00_HiLight H4_EN.book Page 25 Monday, April 18, 2016 2:10 PM